Construction Aluminum Window Profiles Casement Window Frame Set
Building Materials
Broken Bridge Aluminum Windows Doors Profiles:
Broken bridge aluminum doors and windows are mainly made of
heat-insulating broken bridge aluminum profiles and insulating
glass, which have the functions of energy saving, sound insulation,
noise prevention, dust prevention, waterproof and so on.
advantage:
1. Good thermal insulation;
2. There is a drainage outlet designed to ensure smooth drainage
and good water tightness;
3. The three-way sealing structure separates the water vapor
chamber, realizes the balance of water pressure and air pressure,
and prevents condensation and frost;
4. Metal material, heat insulation strip, high temperature
resistance, non combustion, fire prevention function;
5. Broken bridge aluminum doors and windows do not produce harmful
materials in the production process, and the materials can be
recycled, which belongs to green building materials;
6. High strength, not easy to deformation and corrosion, almost no
maintenance.
Disadvantages:
1. To achieve the thermal insulation performance of broken bridge
aluminum doors and windows, PA66 thermal insulation strip is
required, but its price is high, so the price of broken bridge
aluminum doors and windows is also high.
2. In addition, because PVC spacer is cheaper, some illegal
businesses may cut corners, so they need to pay more attention when
purchasing.
Profile Specification:
| Description | Construction Aluminum Window Profiles Casement Window Frame Set
Building Materials |
| Material Thickness(t) | 0.8-2.0 mm |
| Materiral | aluminum alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Wood, Silver White ,Bronze , Champagne, Black, (RAL series)etc. |
| Surface Treatment | anodized, powder coated, electrophoresis, wood grain, polished and
etc |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles |
Aluminum Surfaces:
Anode effect is a special phenomenon in molten salt electrolysis,
especially in electrolytic aluminum production. In production, when
the anode effect occurs, the voltage of the electrolytic cell rises
sharply, reaching 20 ~ 50V, sometimes even higher. Its occurrence
has a great impact on the whole electrolysis series, reduces the
current efficiency, affects various technical indexes of
electrolysis, reduces the output and quality of aluminum, and
destroys the stable power supply of the whole electrolysis series.
In terms of treatment methods, there are no more than two kinds:
extinguish with effect rod (wood rod), or reduce the anode and
increase the blanking amount of alumina, so as to extinguish the
anode effect. No better treatment has been found.
The anode effect occurs because the oxygen-containing ions in the
electrolyte gradually decrease with the progress of the
electrolysis process. When it reaches a certain degree, fluorine
precipitates and reacts with the anode carbon to form carbon
fluoride. When the carbon fluoride decomposes, fine carbon
particles are precipitated. These carbon particles are attached to
the anode surface to prevent the contact between the electrolyte
and the anode, The electrolyte can't wet the anode well, just as
water can't wet the oiled surface, so a layer of gas film with poor
conductivity is formed between the electrolyte and anode, and the
anode overvoltage increases, causing the anode effect. When new
alumina is added, oxygen is precipitated on the anode, which reacts
with carbon powder to gradually calm the anode surface, reduce the
resistance, and the electrolysis process tends to be normal.
Product Description:
FAQ:
Q – What is the average lead time for pre production samples?
A – Our average lead time is normally 7 days for making new samples
and 7 days for testing , totally need about 14days.
Q – What is the average lead time for mass production?
A – Our average lead time is delivery within 20-30 days after
receive deposit and and moulds/samples are passed.
Q – What is CAD?
A – CAD stands for “computer assisted design” and it is a 3-D
program that is used by our clients to provide our technicians with
a three-dimensional example of the custom shape that they want made
at GUANGDONG YONGLONG ALUMINUM.Aluminium Window Profiles
Welcome to visit our company !
Choose us & contact us !
