1.2mm Aluminum Windows Sliding Track Aluminium Extrusion Profiles
For Non Thermal Break Type
Points of Aluminum Sliding Windows Track:
Key points of sliding track for doors and windows of home
decoration
First, select the material of the slide rail.
Now the track materials on the market are different. Most of the
slide rails are made of alloy, and some of them are made of copper.
The slide rail with alloy texture can be divided into common type
and thickened type, which is determined according to the texture of
applicable door or window. If the volume of the door or window is
small and the weight is light, a smaller track can be selected. If
the weight of the door or window is heavy, a thicker track should
be selected to ensure safety and durability.
Second, price reflects quality.
The tracks used on doors and windows are mostly made of alloy, but
the quality is good or bad, which is mainly reflected in the
workmanship and material of slide rails and pulleys. The price of
low-grade door and window slideways on the market is several yuan /
linear meter, the price of middle grade is more than ten yuan /
linear meter, and the price of high-grade is thirty or forty yuan /
linear meter. The thicker the slideway is, the stronger the price
is. The price difference caused by different workmanship is more
obvious in the three fold track sales. The three fold rail is made
of zinc alloy, aluminum alloy and iron. Because the three fold rail
is retracted by rolling balls between rails, the tightness and
evenness of balls and rails are very important. Good quality three
fold rail in the push-pull process, the ball rolling uniform, no
astringent feeling and noise. In terms of price, the price of
high-grade three fold rail is about 100 yuan, which is six to seven
times that of low-grade products.
Third, pay attention to choose the matching pulley.
chart
Pulley is an important part of sliding doors and windows. High
quality pulley can promote the use of sliding doors and windows to
a great extent. The quality of pulley is determined by the quality
of outer pulley and bearing. The outer wheels are mostly made of
nylon fiber or copper. The copper pulley is stronger, but there is
sound when pulling; Nylon fiber pulley has no sound when pulling,
but it is not as wear-resistant as copper pulley. Bearing materials
are also very different. High quality pulley bearings are made of
imported stainless steel. The bearings are installed tightly, and
the sliding feel is soft without noise. Higher grade pulleys can
also adjust the height to make up the distance between the door and
the track, so that the door and the track are connected more
closely. The quality of the small pulleys at the bottom of doors
and windows is also very different. The small pulleys with
excellent technology are light and fast to pull. Some brands of
pulleys are also equipped with anti jump devices, which make them
more safe to use.
Profile Specification:
| Description | 1.2mm Aluminum Windows Sliding Track Aluminium Extrusion Profiles
For Non Thermal Break Type |
| Material Thickness(t) | 0.8-2.0 mm |
| Materiral | aluminum alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Silver White ,Bronze , Champagne, Black, (RAL series)etc. |
| Surface Treatment | anodized, electrophoresis and etc |
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles |
Powder Coated Types:
1: Air spraying method. The powder coating is placed in the spray
gun, and the coating is adsorbed on the surface of preheated
aluminum profile by the adsorption force of compressed air. The
powder is melted on the surface of aluminum profile. Thermoplastic
and thermosetting powder can be used. If it is thermosetting
powder, it should be solidified in the oven. This spraying method
is suitable for the surface of small aluminum profile.
2: Fluidized bed dip coating method. The aluminum profile is
preheated first, and then immersed in a powder coating fluidized
bed to melt the powder to the surface of the aluminum profile.
Thermoplastic and thermosetting powder can be used. If it is
thermosetting powder, it should also be solidified in the oven.
This spraying method is suitable for small aluminum profile surface
with thick film, as well as medium-sized pipes or metal mesh, which
can be fully dip coated.
3: Electrostatic powder spraying. This is a widely used powder
spraying method at present. It uses the principle of electrostatic
adsorption, so that the powder coating under electrostatic
induction can be adsorbed on the surface of aluminum profiles with
opposite charges. Both hot spraying and cold spraying can be used.
After spraying, it needs to be dried in the baking oven. This
spraying method is suitable for the surface of aluminum profiles
with different sizes and shapes, and uses thermoplastic and
thermosetting powders Fine.
4: Electrostatic fluidized bed dip coating method. This spraying
method combines the fluidized bed dip coating method and
electrostatic powder spraying method, using thermoplastic and
thermosetting powder, which is suitable for the mass production of
small aluminum profiles with film thickness less than 150 μ M.
5: Electric field corona coating method. The thermoplastic or
thermosetting powder is placed between two parallel electrodes to
make the powder coating charged, and the coating material is passed
through between the electrodes to make its surface absorb the
powder. A fluidized bed is placed under the device, and the
spraying material is sprayed from the nozzle of the ejector, which
is suitable for spraying small aluminum profiles with thin coating
(10-20 μ m).
Thermal Break Windows:
Thermal breaking aluminum noise and sound insulation. The structure
is carefully designed, the joint is tight, and the test results
show that the air insulation can reach 30-40db, which can ensure
that residents within 50 meters of both sides of the expressway are
not disturbed by noise, and the indoor peace and warmth can also be
ensured adjacent to the downtown.
⒎ bridge breaking aluminum fire protection function. Aluminum alloy
is a metal material and will not burn.
8 Bridge breaking aluminum. Wind sand proof and wind pressure
resistance. The inner frame straight material adopts hollow design,
strong wind pressure deformation resistance and good vibration
resistance effect. It can be used in high-rise buildings and civil
houses, and can be designed with large area window type and large
lighting area; The air tightness of this kind of window is better
than any aluminum and plastic window, which can ensure that there
is no dust in the window sill and floor in the area with large wind
and sand.
⒐ high strength aluminum strength of bridge breaking is not
variant, and maintenance free. The bridge breaking aluminum window
has high tensile and shear strength and high resistance to thermal
deformation. It is strong and durable, and the aluminum section is
not easy to be eroded by acid and alkali, and it is not easy to
turn yellow and fade, and it is almost unnecessary to maintain.
⒑ bridge broken aluminum color.
⒒ bridge breaking aluminum green building materials, circular
economy. The bridge breaking aluminum doors and windows will not
only produce harmful materials during the production process, but
also can be recycled and reused. It is a green building material
environmental protection product, which conforms to the sustainable
development of human beings.
⒓ bridge breaking aluminum has many opening forms, comfortable and
durable. It has flat open, tilting, hanging, push and pull, flat
and recline and compound type, which is suitable for public
buildings, residential quarters and municipal engineering; High
quality hardware parts are durable, the operating handle is
designed with humanized design, beautiful and comfortable, easy to
open and flexible. Each operation has been tested, and the fatigue
test times are more than tens of thousands of times, the sliding is
easy and free, silent, mature and perfect door and window
processing technology, and the high-precision program control
processing center is used for production, and the quality is stable
and guaranteed.
New technology features
The aluminum alloy profile is used to combine the inner and outer
aluminum alloy and the insulation strip by rolling.
The insulating performance and sound insulation effect are improved
by using hollow glass.
The independent sealing structure is adopted, and the sliding
window adopts double rubber strip, double wool strip and four seal
structure; The flat window adopts the principle of equal pressure,
adopts one hard seal and two soft seals and three seal structures,
which has excellent air tightness and water tightness.
High grade accessories are selected, with beautiful shape, flexible
operation, safety and reliability, which is conducive to the heat
insulation effect of doors and windows.
Product Description:
