Powder coating Aluminium Profile , Colourful , Lenth Or Shape
Customize
1.Introduction
Powder spraying is used to spray powder coating on the surface of
the workpiece by spraying powder equipment (electrostatic spray
plastic machine). In electrostatic action, the powder will be
evenly adsorbed on the surface of the workpiece to form a powdery
coating; the powder coating is solidified by high temperature
baking and becomes the final coating of different effect (different
kinds of powder coating effect) The powder spraying effect is
superior to the spray painting process in terms of mechanical
strength, adhesion, corrosion resistance and aging resistance, and
the cost is also under the same effect of spray painting.
The coating is mixed with special resin, pigments, fillers, curing
agents and other auxiliaries in a certain proportion, and is
prepared by hot extrusion and crushing and screening. At normal
temperature, they are stable in storage, by electrostatic spraying,
friction spraying (thermosetting) or fluidized bed soaking
(thermoplastic), and reheating the curing and curing to make a
smooth and bright permanent coating to achieve the purpose of
decoration and corrosion protection.
Powder coating Aluminium Profile , Colourful , Lenth Or Shape
Customize
2.Features
1.High Efficiency: Because It Is Disposable Membrane, It Can Increase Productivity
30-40%
2.Save Energy: Reduce Energy Consumption By About 30%.
3.Less Pollution: No Organic Solvent Volatilization (Not Containing Toluene, Xylene
And Other Harmful Gases In Paint).
4. The Coating Utilization Rate Is High: Up To 95%, And The Powder Can Be Used Repeatedly After Recovery.
5. Film Performance Is Good: Disposable Film Thickness Can Reach 50-80 M, Its Adhesion,
Corrosion Resistance And Other Comprehensive Indicators Are Better
Than The Paint Process.
6. Finished Product Rate Is High: Before Curing, It Can Carry Out Two Times Re Injection. There Are
Many Kinds Of Powder Coating Process, And There Are Two Kinds Of
Electrostatic Powder Spraying And Plastic Dipping.
Powder Coating Is A New Type Of Solid Powder Coating Without
Solvent 100%. It Has The Characteristics Of No Solvent, No
Pollution, Energy And Resources Saving, Labor Intensity Reduction
And Mechanical Strength Of Coating Film.
Powder coating Aluminium Profile , Colourful , Lenth Or Shape
Customize
3.Products of our company
| Implements National Standard | Gb/5237.3-2008 |
| Coat Thickness | 40um<=thickness<=120um |
| Coat Shock-Resistance | No cracking or fall-off afer shock test |
| Surface Type | Matte , Highly glosy |
| Colours | Optional RAL colours(over 100 types) |
| Adwantages/Features | Providing colourful products with various mechanical performances
to adapt all kinds of architectural styles. |
4.Tips:
1.keep away from fire sources and avoid direct sunlight, should be
placed in a well ventilated place below 35 C.
2. Avoid storage in places where water, organic solvents, oil and
other materials are contaminated.
3. Powder coating should not be exposed to the air at any time,
should be stamped at any time or tighten the bag to avoid debris
mixing.
4. Avoid long term contact with skin. Apply powder to soap and
rinse water. Do not use solvent. The safety of the construction
site
5. Painting equipment should be well grounded to eliminate static
electricity.
6. Avoid the phenomenon of unprovoked discharge of the coating
machine
7. In the powder spraying room, the concentration of the floating
dust should be controlled below the safe concentration as far as
possible so as to avoid the danger of dust explosion.
Please tell us the information below, and we will give the best
suggestion to you!
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
correspondence mold.
3. Which color you want or tell us the architectural style you
like.
4. Purchase quantity. It will convenient us to give you the best
price.
Choose us & contact us!
