Aluminum extrusion window profile,window and door
Specifiaction:
| Description | Aluminum extrusion profile,window and door |
| Material Thickness(t) | t=1.0 / 1.2 / 1.4 |
| Material | Aluminum Alloy 6063, 6061 |
| Annealing Treatment | T5,T6 |
| Color | Green, Grey, Black, White, (RAL series)etc. |
| Surface Treatment |
Mill finish, anodized, powder coated, electrophoresis, sand balsting etc.and depend on customer’s demand.
|
| Shape | Square, Round, Flat, Oval, and according to customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage |
Building, Production Line, Decoration, Industrial, Transportation, Door and window, etc.
|
| Package | 1. Pearl cotton foam for each profile; 2. Wrap with shrink film exterior; 3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical performances to adapt all kinds of architectural styles |
Chemical composition
| Alloy | Si | Mg | Fe | Cu | Mn | Zn | Cr | Ti |
| 6063 | 0.2~0.6 | 0.45~0.90 | <0.35 | <0.10 | <0.10 | <0.10 | <0.10 | <0.10 |
| | | | | | | | |
| 6061 | 0.4~0.8 | 0.80~1.2 | <0.70 | 0.15~0.4 | <0.15 | <0.25 | 0.04~0.35 | <0.15 |
| | | | | | | |
|
Equipment
| Production lines | 22 |
| Anodizing and electrophoresis | 4 |
| Powder Coating | 2 |
| Wood Grain | 4 |
| Painting | 1 |
| Polishing | 1 |
| Brushing | 1 |
| Supply ability | 6000Tons per month |
Certificate
1: Guangdong famous brand
2: The ISO9001 quality management system certification
3: ISO14001 environmental management system certification
4: OHSMS18001 occupational health and safety management system
certification,etc.
Photo
Aluminum knowledge
pure aluminum products: are two types of pure aluminum separation
and pressure processing products, the former is said by chemical
composition Al, the latter is expressed in the Chinese pinyin LG
(aluminium, industrial use).
Pressure processing of aluminum alloy aluminum alloy pressure:
processing products are divided into rust (LF), hard (LY), forging
(LD), superhard (LC), coated (LB), special (LT) and seven classes
such as brazing (LQ). Commonly used aluminum alloy materials are
annealed (M braised fire), hardened (Y), hot rolling (R), etc.
2, daily necessities 2000 series -- AL x Cu department
1. 2011 fast - cut alloy, good cutting quality. But the corrosion
resistance is poor. For corrosion resistance, 6062 alloy volume
shaft, optical component and screw head are used
2. 2014 2024, 2024, 2017 2024 contains a large amount of Cu, the
corrosion resistance is not good, but the strength is high, can be
used as construction material. Forging can also be applied.
Aircraft, gears, oil; Pressure component, wheel shaft
3. 2117 2117 solidification heat treatment, as the hinge pin
material, to delay the alloy of normal temperature aging velocity.
4. 2018 2218 2218 forging alloy. Good forging and high temperature
strength. Therefore, it is used in forging products that require
heat resistance. The corrosion is not good. Cylinder head, piston,
VTR cylinder
5. 2618 2618 forging alloy. High temperature strength but not good
corrosion resistance. Piston, rubber forming mold, general heat -
resistant components
6. 2219 2219 strength, low temperature and high temperature
characteristics, good solubility, but not good corrosion
resistance. Cryogenic containers, space machines
7. Made of forged alloy in 2025. Good forging and high strength,
but not good corrosion resistance. Alloy for propellers and
magnetic barrels 2N01 - forging. Heat resistance, high strength,
but not good corrosion resistance. Aircraft engine, hydraulic
components
